Septum
Injection port septum
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
221-76650-01 |
![]() |
25 | Thermogreen LB-2, green, low bleed, least amount of plasticizing agent | |
201-35584 |
![]() |
20 | Silicone rubber, white, injection unit temperature: lower than 250℃ | |
201-35584-84 |
![]() |
200 | Silicone rubber, white, injection unit temperature: lower than 250℃ | |
221-48972-91 |
![]() |
20 | Long-life (LL), blue, low bleed, 450℃ max. | |
221-48398-91 |
![]() |
20 | For HT high temperature, brown, low bleed, 450℃ max., low bleed under a high temperature and highly durable |
Injection
Silica wool
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
201-47616-01 | 2g | - | ||
201-47616-84 | 2g × 5 pcs. | - | ||
221-48600 | 2g | - | ||
225-09147 | 10g | - |
Glass insert (for capillary column)
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
221-48335-01 |
![]() |
1 | (95mm,SPL) | |
221-48876-03 |
![]() |
5 | With wool, deactivated (95 mm, SPL) | |
221-48876-05 |
![]() |
5 | No wool, silanized | |
225-20803-01 |
![]() |
5 | With wool, deactivated |
Glass insert components
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
036-11203-84 | 5 | Standard (fluororubber). Injection unit temperature: room temperature to 300℃ | ||
221-47222-91 | 4 | For splitless/WBI (graphite), for high temperature. Injection unit temperature: 350 ℃ to 450 ℃ | ||
221-48393-91 | 4 | For split (graphite), for high temperature. Injection unit temperature: 350℃ to 450 ℃ |
Ion Source
TQ8050/TQ8040/TQ8030/QP2020/QP2010 Ultra/QP2010 Plus ion source
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
225-17705-92 | 1 | Not including repeller assembly, heat treated | ||
225-17697-91 | 1 | Not including repeller assembly, heat treated | ||
225-17705-91 | 1 | Not including repeller assembly, heat treated | ||
225-01068 | 1 | Two are used in the repeller assembly. | ||
225-10340-91 | 1 | Shared by EI/CI/NCI | ||
225-17659-91 | 1 | Including insulator bushes, heat treated | ||
225-17710-91 | 1 | Shared by CI/NCI, including insulator bushes, heat treated |
Others
Rotary pump oil
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
017-30163-11 |
![]() |
1L | For E2M1.5 rotary pumps,0.28 L/use |
Sample pot (DI: For direct sample inlet unit)
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
225-09470 | 10 | Quartz | ||
225-09344 | 100 | Standard accessory, Pyrex |
Standard sample
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
225-09493-03 | 5g | For MS tuning, with certificate of traceability | ||
225-09493-01 | 0.5g | For high mass range MS calibration (m/z 866), with certificate of traceability | ||
225-09493-05 | 1g | For high mass range MS calibration (m/z 1066), with certificate of traceability |
Glass insert
Glass insert (for capillary column)
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
221-41444-01 |
![]() |
1 | (95mm,SPL) |