Shimadzu’s New FTIR-Based Plastic Analyzer Simplifies Evaluation of Plastic Degradation
UV accessory selection guide for liquids
Liquid Samples
Sample | Analytical form and analytical condition | Accessory | |||
---|---|---|---|---|---|
Transparent Sample | Sample volume: 2.5 mL min. | Standard Sample Compartment + 10 mm Cell | |||
Micro-volume measurement | 1 mL min. | Semi-Micro Cell + Micro Cell Holder with Mask | |||
500 µL min. | Micro Cell + Micro Cell Holder with Mask | ||||
50 µL min. | Super-micro Cell + Super-micro Cell Holder | ||||
For automatically measuring samples in multiple cells | MMC-1600 8/16 Series Micro Multi-Cell Holders and Cells | ||||
Samples with high absorbance, but that are difficult to dilute (short optical path measurement) | Short-Path Cell (1, 2, 5 mm) + Spacer for Short-Path Cell | ||||
Samples with low absorbance, but that are difficult to concentrate (long optical path measurement) | Long-Path Cell (20, 30, 50, 100 mm) + Long-Path Rectangular Cell Holder | ||||
For automatically measuring samples in multiple cells | Normal measurement | Multi-Cell Sample Compartment (sample volume: 2.5 mL min.) | |||
Small sample volumes (50 µL min.) | MMC-1600 8/16 Series Micro Multi-Cell Holders and Cells | ||||
Requires temperature control | CPS-100 Six-Cell Thermoelectrically Temperature-Controlled Cell Positioner (sample volume: 2.5 mL min.) |
||||
For temperaturecontrolled measurements (constanttemperature measurement) |
Temperature-controlled with water circulation | Constant-Temperature Cell Holder + NTT-2200P Constant-Temperature Water Circulator | |||
Thermoelectrically temperature controlled | Normal measurement | TCC-100 Thermoelectrically Temperature-Controlled Cell Holder | |||
Multi Samples | CPS-100 Six-Cell Thermoelectrically Temperature-Controlled Cell Positioner | ||||
Tm Analysis / Temperature control | S-1700 Thermoelectric Single Cell Holder | ||||
Automatically supplies sample to flow cells (automatic analysis) |
Requires temperature control (constant-temperature water circulation) | 160C Sipper Unit + NTT-2200P | |||
Temperature control not necessary | 160L/160T/160U Sipper Unit (Select type based on liquid volume.) | ||||
Requires accurate control of aspiration volume. | Requires temperature control (constant-temperature water circulation) |
Syringe Sipper CN + NTT-2200P (Select flow cell based on liquid volume.) | |||
Temperature control not necessary | Syringe Sipper N (Select flow cell based on liquid volume) | ||||
For automating measurement of multiple samples | Sipper Unit or Syringe Sipper + ASC-5 Auto Sample Changer | ||||
Suspension Sample | Absorption measurement of suspension samples | Wavelength range: 240 nm min. | Integrating Sphere Attachment (ISR-2600, ISR-2600Plus, ISR-603) | ||
For measuring UV region above 190 nm | SolidSpec-3700DUV | ||||
Turbidity measurement | Light transmitted light turbidity measurement (commonly used measurement method) |
10/50 mm Cell + Long-Path Rectangular Cell Holder (Optical path length of cell depends on test method.) |
|||
Integrating sphere turbidity measurement | Integrating Sphere Attachment (ISR-2600, ISR-2600Plus, ISR-603) |
News / Events
-
-
A bridge with our customers - Plastic, Recycling and Environmental aspects
-
Release of Six New UV-i Selection Brand UV-VIS Spectrophotometer Models
The SolidSpec-3700i/3700i DUV have three detectors which cover the range from ultraviolet to near-infrared. This product is equipped with LabSolutions UV-Vis software.
-
Shimadzu has released the UV-1900i UV-VIS Spectrophotometer.
The UV-1900i is a double-beam UV-Vis Spectrophotometer using Shimadzu's original LO-RAY-LIGH™ diffraction grating technology.
This product is equipped with LabSolutions UV-Vis software. -
FTIR TALK LETTER Vol. 33 is now available.
-
FTIR TALK LETTER Vol. 32 is now available.