AP Series - Specs
Analytical Balaneces
AP225W
| Capacity |
220g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.9 kg |
| Body Dimensions |
Approx. 212(W) x 411(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.01 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
8 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.1 mg |
| Minimum Weight *2 |
20 mg |
| Repeatability (Standard deviation) |
0.015mg |
| External Calibration Weight Range for Span Calibration |
95 to 220.00090 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.
AP125WD
| Capacity |
120 g/52 g |
|---|---|
| Minimum display |
0.1 mg/0.01 mg |
AP324Y
| Capacity |
320 g |
|---|---|
| Minimum display |
0.1 mg |
AP224Y
| Capacity |
220 g |
|---|---|
| Minimum display |
0.1 mg |
AP124Y
| Capacity |
120 g |
|---|---|
| Minimum display |
0.1 mg |
AP324X
| Capacity |
320 g |
|---|---|
| Minimum display |
0.1 mg |
AP224X
| Capacity |
220 g |
|---|---|
| Minimum display |
0.1 mg |
AP124X
| Capacity |
120 g |
|---|---|
| Minimum display |
0.1 mg |
AP324W
| Capacity |
320 g |
|---|---|
| Minimum display |
0.1 mg |
AP224W
| Capacity |
220 g |
|---|---|
| Minimum display |
0.1 mg |
AP124W
| Capacity |
120 g |
|---|---|
| Minimum display |
0.1 mg |
AP225WD
| Capacity |
220 g/102 g |
|---|---|
| Minimum display |
0.1 mg/0.01 mg |
AP135W
| Capacity |
135 g |
|---|---|
| Minimum display |
0.01 mg |
AP125WD
| Capacity |
120 g / 52g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.9 kg |
| Body Dimensions |
Approx. 212(W) x 411(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.01 mg / 0.1 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
2 sec. / 8 sec |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg /±0.05 mg |
| Minimum Weight *2 |
30 mg |
| Repeatability (Standard deviation) |
0.1 mg / 0.02 mg |
| External Calibration Weight Range for Span Calibration |
95 to 120.0090 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP324Y
| Capacity |
320 g |
|---|---|
| mol Conversion Function |
Not Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 6.5 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Not Included |
| Clock-CAL |
Not Included |
| Inspection Support Function |
Not Included |
| Sample (Concentration) Preparation |
Not Included |
| HPLC Buffer Solution Preparation |
Not Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Not Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Not Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.3 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.15 mg |
| External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
| Calibration Weight |
No |
| Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP224Y
| Capacity |
220 g |
|---|---|
| mol Conversion Function |
Not Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 6.5 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Not Included |
| Clock-CAL |
Not Included |
| Inspection Support Function |
Not Included |
| Sample (Concentration) Preparation |
Not Included |
| HPLC Buffer Solution Preparation |
Not Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Not Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Not Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.1 mg |
| External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
| Calibration Weight |
No |
| Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP124Y
| Capacity |
120 g |
|---|---|
| mol Conversion Function |
Not Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 6.5 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Not Included |
| Clock-CAL |
Not Included |
| Inspection Support Function |
Not Included |
| Sample (Concentration) Preparation |
Not Included |
| HPLC Buffer Solution Preparation |
Not Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Not Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Not Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.1 mg |
| External Calibration Weight Range for Span Calibration |
45 to 120.009 g |
| Calibration Weight |
No |
| Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP324X
| Capacity |
320 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.0 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Not Included |
| HPLC Buffer Solution Preparation |
Not Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Not Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Not Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.3 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.15 mg |
| External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
| Calibration Weight |
Built-in |
| Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP224X
| Capacity |
220 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.0 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Not Included |
| HPLC Buffer Solution Preparation |
Not Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Not Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Not Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.1 mg |
| External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
| Calibration Weight |
Built-in |
| Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP124X
| Capacity |
120 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.0 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Not Included |
| HPLC Buffer Solution Preparation |
Not Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Not Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Not Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.1 mg |
| External Calibration Weight Range for Span Calibration |
45 to 120.009 g |
| Calibration Weight |
Built-in |
| Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP324W
| Capacity |
320 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.0 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.3 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.15 mg |
| External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP224W
| Capacity |
220 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.0 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.1 mg |
| External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP124W
| Capacity |
120 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.0 kg |
| Body Dimensions |
Approx. 212(W) x 367(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.1 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
2 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg |
| Minimum Weight *2 |
200 mg |
| Repeatability (Standard deviation) |
0.1 mg |
| External Calibration Weight Range for Span Calibration |
45 to 120.009 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP225WD
| Capacity |
220 g / 102g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.9 kg |
| Body Dimensions |
Approx. 212(W) x 411(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.01 mg / 0.1 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
2 sec. / 8 sec |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.2 mg /±0.1 mg |
| Minimum Weight *2 |
30 mg |
| Repeatability (Standard deviation) |
0.1 mg / 0.05 mg |
| External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP135W
| Capacity |
135 g |
|---|---|
| mol Conversion Function |
Included |
| Display |
OEL display (dot matrix) |
| Weight |
Approx. 7.9 kg |
| Body Dimensions |
Approx. 212(W) x 411(D) x 345(H)mm |
| Pan Size |
ø91 mm |
| Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
| Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
| Ionizer |
Optional |
| Clock-CAL |
Included |
| Inspection Support Function |
Included |
| Sample (Concentration) Preparation |
Included |
| HPLC Buffer Solution Preparation |
Included |
| Minimum display |
0.01 mg |
| Recipe Compounding |
Included |
| USB Device (Type B) |
Included |
| USB Host (Type A) |
Included |
| Response Time *4 |
8 sec. |
| Response Time for race Measurements *3 |
2 sec. |
| Linearity *2 |
±0.1 mg |
| Minimum Weight *2 |
30 mg |
| Repeatability (Standard deviation) |
0.05 mg |
| External Calibration Weight Range for Span Calibration |
45 to 135.009 g |
| Calibration Weight |
Built-in *1 |
| Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
Downloads
Download the latest brochure.